MAG212 CYBER ORIGINAL ARTICLE

SonicWall Gen 6 Firewalls Get No More Patches: End-of-Support Dates, Risks, and What to Do Until You Replace Them

November 20, 2026 · El Mostafa Ouchen

The patches have stopped: SonicWall Gen 6 Firewalls Get No More Patches: End-of-Support Dates, Risks, and What to Do Until You Replace Them. MAG212 CYBER.

From the MAG212 CYBER Daily, 20 November 2026. Every command is copied from official documentation or the cited analysis and was not tested by MAG212; run it only on systems you are authorised to administer.

Status: On 18 November 2026 SonicWall said it releases no firmware or security patches for Gen 6 and 6.5 firewalls, including NSv virtual units, “regardless of severity”. No new vulnerability was announced with the notice. SonicWall’s fix is replacement with a Gen 8 running SonicOS 8. [1][2]

What happened

SonicWall’s product advisory “Retire Unsupported Gen 6 Firewalls” says Gen 6 support can no longer be bought or renewed and that there will be no exception for critical vulnerabilities. It adds that it expects “internet-facing Gen 6 firewalls to be actively targeted”. The Hacker News reported the notice on 20 November. [1][2]

Why this matters

Firewalls and VPN gateways are among the most attacked devices on the internet, because they face it directly and often hold the keys to remote access. SonicWall gear has been hit hard before. From now on, any new Gen 6 flaw stays open for good. Every Gen 6 unit still online is a countdown to the next bug. (MAG212 analysis)

The patches have stopped. Diagram by MAG212 CYBER.
Table from the MAG212 CYBER Daily, 20 November 2026. Sources are listed below.

What SonicWall is saying

The notice points to CVE-2024-40766 (CVSS 9.3) as an example. That access-control flaw affected Gen 5, Gen 6 and early Gen 7 firewalls and was exploited in the wild. Supported devices got a fix; a Gen 6 unit would not get one today. SonicWall also warns that attackers “now use automation and AI to find and exploit unsupported edge devices faster than ever”. [1][2]

End-of-support dates

End of supportGen 6 / 6.5 models
1 Oct 2026TZ350/W, TZ500/W, SOHO 250/W; NSA 4600/5600/6600; NSa 4650/5650/6650
1 Aug 2026TZ400/W, TZ600, TZ600P, NSA 3600; NSa 3650
1 May 2026NSa 2650
16 Apr 2026SOHO, SOHO W, TZ300P, NSa 9250/9450/9650; NSv 10–1600
20 Feb 2026SuperMassive 9200/9400/9600/9800; NSsp 12800, 12400
23 Jan 2025TZ300, TZ300W
8 Mar 2024NSA 2600

Source: SonicWall’s notice. Every model listed is past end of support. [1]

A pattern of end-of-life decisions

  • In early November SonicWall said two flaws in GMS 9.5.2 and earlier, CVE-2026-109593 (CVSS 9.1) and CVE-2026-109594 (CVSS 6.8), will not be fixed, and told customers to move to NSM. [4]
  • The Hacker News also reports that CVE-2026-102255 (CVSS 10.0), patched in October, is under active exploitation. [4]
  • Gen 7 and Gen 8 firewalls received fixes in SNWLID-2026-0014 (SonicOS 7.3.4-7013 and 8.2.3-8015). [3]

What to do until the box is gone

SonicWall’s interim steps: [1]

  1. Disable WAN management: HTTPS, SSH and SNMP on WAN interfaces.
  2. Disable SSL VPN, or restrict it to known source addresses.
  3. Enforce MFA on all remote-access and admin accounts, and reset local passwords.
  4. Disable unused services and interfaces.
  5. Monitor logs for unusual logins, configuration changes and traffic.
  6. Put internet-facing and remote-access units first, and include spares and branch units in your inventory.

SonicWall is explicit that these steps reduce exposure but do “not make Gen 6 secure”. [1]

Migration

SonicWall’s path is a Gen 8 firewall on SonicOS 8. Supported settings can be imported from SonicOS 6.5 with the in-product import or the NSM Migration App, so a full rebuild is not needed. SonicWall points owners to an authorised partner and to its Secure Upgrade Plus programme. [1][3]

How to prioritise

Start with units that terminate remote access or expose management to the internet, then branch and spare units that nobody watches. Put a replacement date on every unit in your risk register, and treat any Gen 6 that must stay online as a known exception with an owner. (MAG212 analysis)

Related on MAG212 CYBER

Sources

  1. [1] SonicWall, “Product advisory: Retire unsupported Gen 6 firewalls“, 18 Nov 2026.
  2. [2] The Hacker News, “SonicWall warns Gen 6 firewalls won't get patches“, 20 Nov 2026.
  3. [3] SonicWall, “SNWLID-2026-0014: SonicOS 7.3.4 and 8.2.3 security advisory“, 3 Nov 2026.
  4. [4] The Hacker News, “SonicWall won't patch end-of-life GMS flaws“, 4 Nov 2026.

Written and edited by El Mostafa Ouchen for MAG212 CYBER. Facts checked against the sources above as of 20 November 2026, 6:00 AM PT.